How To Flash ROM of Samsung Android Devices Using Odin

How To Flash ROM of Samsung Android Devices Using Odin

How To Flash ROM of Samsung Android Devices Using Odin – Odin is a tool or software tool that uses custom built-in flash, stock rom, flash canel or root packs on Samsung smart phones and tablets. Odin is a Bessy Windows software, meaning you need a computer to work. Samsung’s flash devices using simple Odin, just follow the steps below, you must have a successful flashing in a few minutes.

NB! We invite you to take a full backup of your phone if possible, before flashing because during the flashing process your personal data will be removed or lost. If you do an upgrade, do a full operating system or backup nandroid only in case something goes wrong after flashing, you can always return back by flashing your operating system backup.

Requirements for flashing Samsung Android

  • The file you want to flash (custom rom, stock rom, canl flash or root packs).
  • USB cable for your device
  • Windows computer
  • Your Android device

How To Flash ROM of Samsung Android Devices Using Odin

First, make sure that the USB debugging in settings option is enabled. (If you have not enabled the developers option, go to Settings> About phone> Build number, click it 7 times or more until the Developer option is enabled, and you can download and install the device driver on your computer, skip this if you have You’ve already installed it (if your computer can see your device when you connect it).

See Updated Glo 0.0kobo Unlimited Free Browsing Via Latest Tweakware 3.4 on Android and PC

Step 1: Download and extract which flash ROM , Samsung ROM is available for download here

Step 2: Download and extract Odin v3.10.7 or later version (see below for all versions)

Step 3: Install Odin on your computer

Step 4: Turn off your smartphone and restart it in Download Mode (Odin Mode) by pressing

Home + Power + Volume Down Buttons together.

When entering the download mode you will see a yellow triangle warning sign. All you have to do is press the volume up key to continue.

Step 5: Connect your Samsung device to your computer and wait until you get a blue mark in the Odin.

Step 6: Now, click the AB / PDA button, locate and select Samsung extracted

Step 7: Now, make sure that you do not reposition the re-partitioning box before you start the blinking process.

 

Step 8: Finally, click the Start button, and sit while the flashing process is complete.

 

Step 9: A green passcode appears on the computer, remove the USB cable from the device. The device will automatically restart during this process.

Also Read Advantages and Drawbacks of Android Lollipop

Step 10: Your Samsung device will now restart but stumble in the boot (this is called a boot loop). All you have to do is reboot in recovery mode by pressing and holding

 

Volume key + Home key + Power switch together,

 

When the phone vibrates, leave the power switch but keep holding

 

Key op key and home key.

 

This way, your device will boot in recovery mode.

Step 11: In recovery mode, select wipe data / factory reset (using the volume up and down keys for navigation and home key to select)

Step 12: Do the same for the cache (wipe it). Once the data cache is cleared, go to System Restart and select it.

Step 13: Now, your Samsung device will be restarted without any problem, running on your stock ROMs and flashes.

Various Versions of Odin Available for Download

Download Odin3 v1.70.0

Download Odin3 v1.82.0

Download Odin3 v1.83.0

Download Odin3 v1.84.0

How To Flash ROM of Samsung Android Devices Using Odin

Be the first to comment

Leave a Reply

Your email address will not be published.


*